Trooper LTD 4WD V6-3.5L (2002)
Brake Pedal Assy: Service and Repair
Removal
1) Remove shift knob.
2) Remove front console assembly.
3) Remove lower cluster assembly.
4) Remove instrument panel driver lower cover.
5) Remove driver knee bolster assembly.
6) Remove anti- theft controller.
7) Remove stoplight switch connector.
8) Remove return spring.
9) Remove snap pin.
10) Remove pin.
11) Remove nut.
12) Remove fulcrum pin.
13) Remove brake pedal.
Installation
1) Install brake pedal.
2) Install fulcrum pin and apply grease to the entire circumference of the fulcrum pin.
Torque: 33 Nm (24 ft. lbs.)
3) Install nut and tighten the nut to the specified torque.
Torque: 33 Nm (24 ft. lbs.)
4) Install pin and apply grease to the entire circumference of the push rod pin.
