Trooper LTD 4WD V6-3.5L (2002)
Inspection and Repair
Visual Check
Make necessary parts replacement if cuts, nicks, excessive wear, or other abnormal conditions are found through inspection. Check the following
parts:
^
Yoke clevis
^
Valve body guard
^
Silencer
^
Filter plate and seal assembly
Installation
1) Install plate and seal assembly.
2) Install retainer.
3) Install 2 gaskets and spacer.
4) Install filter.
5) Install silencer.
6) Install valve body guard.
7) Install retainer.
8) Install lock nut and tighten to the specified torque.
Torque: 20 Nm (15 ft. lbs.)
9) Install yoke clevis.
10) Install vacuum booster.
11) Install master cylinder and after installation, perform brake pedal check and adjustment.