Trooper LTD 4WD V6-3.5L (2002)
b. Align timing mark on intake camshaft (one dot for right bank, two dots for left bank) and exhaust camshaft (one dot for right bank, two dots for
left bank) to timing mark on camshaft drive gear (one dot).
c. Tighten twenty bolts in numerical order on one side bank as shown in the illustration.
Torque: 10 Nm (89 inch lbs.)
4. If the oil seal requires replacement, use the J-42985 to install the oil seal.
5. Tighten bolt for camshaft drive gear pulley to the specified torque using the J-43041 universal holder.
Torque: 98 Nm (72 ft. lbs.)