Trooper LTD 4WD V6-3.5L (2002)
Exhaust Pipe: Service and Repair
Exhaust Silencer
Exhaust Silencer
Exhaust Silencer and Associated Parts
Removal
1. Disconnect battery ground cable.
2. Raise the vehicle and support with suitable safety stands.
3. Remove rear exhaust pipe nuts (4) then disconnect rear exhaust pipe from exhaust silencer.
4. Remove exhaust silencer fixing bolts (8) then disconnect exhaust silencer from front exhaust pipe (11).
5. Remove exhaust silencer mounting nuts (12) from rubber support (6) chassis side then remove exhaust silencer (1).
Installation
1. Install the exhaust silencer (1) and tighten two nuts (12) to the specified torque.
Nuts: 16 Nm (12 ft. lbs.)
2. Install the exhaust silencer and tighten two bolts (8) on front exhaust pipe to specified torque.
Bolts: 43 Nm (32 ft. lbs.)
3. Install the rear exhaust pipe (3) and tighten on exhaust silencer to specified torque.
Nuts: 43 Nm (32 ft. lbs.)