isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Blower Assembly|Page 4636 > < Blower Assembly
Page 2
background image

6. Remove evaporator assembly (A/C only).

-

Refer to Evaporator Assembly.

7. Remove dash side trim panel (RH).
8. Disconnect blower motor connector.
9. Remove blower assembly.

Installation

To install, follow the removal steps in the reverse order, noting the
following point:

1. Adjust the control lever assembly cables.

Refer to Control Lever Assembly.

Blower Assembly|Page 4636 > < Blower Assembly