Trooper LTD 4WD V6-3.5L (2002)
Condenser HVAC: Service and Repair
Condenser Assembly And Associated Parts
Condenser Assembly
Removal
1. Disconnect the battery ground cable.
2. Discharge and recover refrigerant.
-
Refer to Refrigerant Recovery.
3. Remove radiator grille.
4. Remove front bumper assembly.
-
Refer to Front Bumper in Body Structure section.
5. Remove engine hood front end stay.
6. Disconnect pressure switch connector.
7. Disconnect refrigerant line.
-
When removing the line connector, the connecting part should immediately be plugged or capped to prevent foreign matter from being mixed
into the line.
8. Remove condenser assembly.
-
Handle with care to prevent damaging the condenser or radiator fin.
Installation
1. Install condenser assembly.
-
If installing a new condenser, be sure to add 30 cu.cm (1.0 fl. oz.) of new compressor oil to a new one.
-
Tighten the condenser fixing bolts to the specified torque.
