Trooper LTD 4WD V6-3.5L (2002)
Key Reminder Switch: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Remove the front console assembly (1).
Refer to Instrument Panel Assembly in Body Structure.
3. Remove the lower cluster assembly (2).
Refer to Instrument Panel Assembly in Body Structure.
4. Remove the instrument panel driver lower cover assembly (3).
Refer to Instrument Panel Assembly in Body Structure.
5. Remove seven screws to remove the steering cow (6 ).
6. Disconnect the connector, remove the screw (4) and then remove the starter switch (5).
Installation
To install, follow the removal steps in the reverse order noting the following point.