Trooper LTD 4WD V6-3.5L (2002)
Canister Purge Solenoid: Service and Repair
PURGE SOLENOID VALUE
EVAP Canister Purge Solenoid (Purge Duty Solenoid Valve)
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Disconnect the electrical connector from the EVAP canister purge solenoid.
3. Disconnect the vacuum hoses from the EVAP canister purge solenoid.
4. Remove the EVAP canister purge solenoid retaining bolt from the common chamber.
5. Remove the EVAP canister purge solenoid.
INSTALLATION PROCEDURE
1. Install the EVAP canister purge solenoid on the upper intake manifold.
2. Install the EVAP canister purge solenoid retaining bolt.
Tighten the bolts to ......................................................................................................................................................................... 20 N.m (16 lb ft).
3. Connect the vacuum hoses to the EVAP canister purge solenoid.