isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Air Bag Systems|Removal and Installation|Page 4963 > < Air Bag Systems|Removal and Installation|Page 4961
Page 3
background image

36 through 37. If the air bag assembly deployed, proceed to step 35.

35. With both air bags deployed, the vehicle may be scrapped in the same manner as a non-SRS equipped vehicle.

NOTE:  The remaining steps are to be followed in the unlikely event that the air bag assembly did not deploy after following these procedures.

36. Remove the undeployed air bag assembly (s) from the vehicle.  For driver air bag assembly refer to in the "Passenger Air Bag Assembly

Removal".

WARNING:  WHEN STORING A LIVE AIR BAG ASSEMBLY OR WHEN LEAVING A LIVE AIR BAG ASSEMBLY
UNATTENDED ON A BENCH OR OTHER SURFACE, ALWAYS FACE THE BAG AND TRIM COVER UP, AWAY FROM THE
SURFACE.  THIS IS NECESSARY SO THAT A FREE SPACE IS PROVIDED TO ALLOW THE AIR BAG TO EXPAND IN THE
UNLIKELY EVENT OF ACCIDENTAL DEPLOYMENT.  FAILURE TO FOLLOW PROCEDURES COULD RESULT IN
PERSONAL INJURY.

37. Temporarily store the air bag assembly with the air bag opening facing up, away from the surface upon which it rests.

Air Bag Systems|Removal and Installation|Page 4963 > < Air Bag Systems|Removal and Installation|Page 4961