Trooper LTD 4WD V6-3.5L (2002)
Seat Belt: Service and Repair
Rear Seat Belt
Rear Seat Belt And Associated Parts
Removal
1. Disconnect the battery ground cable.
2. Remove the rear end floor trim cover.
3. Remove the luggage side trim cover. Refer to Luggage Side and Quarter Upper Trim Cover in Exterior/Interior Trim.
4. Remove the rear seat belt anchor bolt cover and anchor bolt (Upper Side).
5. Remove the seat belt lower anchor bolt and remove the retractor from dust cover slit to remove the rear seat belt.
Installation
To install, follow the removal steps in the reverse order, noting the following point.
1. Tighten the seat belt anchor bolts to the specified torque.
Torque: 39 N.m (29 lb ft)