Trooper LTD 4WD V6-3.5L (2002)
Seat Belt Buckle: Service and Repair
Front Seat Belt Buckle Assembly
Removal
1. Disconnect the battery ground cable.
2. Disconnect the seat belt warning connector (driver's side) (3) and remove a clip(2).
3. Remove the front seat buckle assembly(1).
Installation
To install, follow the removal steps in the reverse order, noting the following points.
1. Fix the buckle to the rotation-stop position(2) securely to install the front seat buckle assembly(1).
2. Tighten the buckle anchor bolt to the specified torque.
Torque: 39 N.m (29 lb ft)
