Trooper LTD 4WD V6-3.5L (2002)
9. Remove lower ball joint by using remover J-29107.
Caution: Be careful not to damage the ball joint boot
10. Remove upper ball joint by using remover J-36831.
Caution: Be careful not to damage the ball joint boot
11. Remove knuckle assembly.
12. Remove oil seal.
13. Remove washer.
14. Remove needle bearing by using remover J-23907.
Inspection and Repair
Make necessary correction or parts replacement if wear, damage, corrosion or any other abnormal conditions are found through inspection.
^
Check the following parts:
^
Knuckle
^
Knuckle arm
^
Needle bearing
^
Thrust washer
Installation