Trooper LTD 4WD V6-3.5L (2002)
Stabilizer Bar: Service and Repair
Rear
Removal
1. Raise the vehicle and support the frame with suitable safety stands.
2. Remove wheel and tire assembly.
3. Remove nut and washer.
4. Remove link.
Caution: Be careful not to damage the ball joint boot
5. Remove bracket.
6. Remove stabilizer bar.
7. Remove rubber bushing.
Inspection and Repair
Make necessary correction or parts replacement if wear, damage, corrosion or any other abnormal conditions are found through inspection.
Check the following parts:
^
Stabilizer bar
^
Rubber bushing
^
Link ball joint