Trooper LTD 4WD V6-3.5L (2002)
4. Apply the setting marks (3) to the torsion bar and lower control arm, then remove torsion bar.
Inspection and Repair
Make necessary correction or parts replacement if wear, damage, corrosion or any other abnormal conditions are found through inspection.
Check the following parts:
^
Torsion bar
^
Height control arm
^
Adjust bolt
^
Rubber seat
Installation
1. Apply grease to the serrated portions, then install torsion bar. Make sure the bars are on their correct respective sides and align the setting marks
(3).
2. Apply grease to the portion that fits into the bracket then install height control arm and align the setting marks (2).
