Trooper LTD 4WD V6-3.5L (2002)
Clutch Pedal Engagement Height (14): MIN. 30 mm (1.18 inch)
7. If the measured value exceeds the specified limit, check the following points. Repair if necessary:
Hydraulic circuit for fluid leakage or air in circuit.
^
Clutch disc warped.
^
Diaphragm spring weakened or tip of fingers worn.
^
Driven plate sticking on splines.
^
Release bearing worn or damaged.
^
Master cylinder and slave cylinder worn.
Torque Specifications
^
Master cylinder to dash panel
Torque: 16 Nm (12 ft. lbs.)
^
Clutch pedal to dash panel
Torque: 21 Nm (15 ft. lbs.)
^
Master cylinder push rod to yoke
Torque: 17 Nm (12 ft. lbs.)
^
Clutch pipe to master cylinder
Torque: 12 Nm (9 ft. lbs.)
^
Clutch pipe to flex, hose
Torque: 16 Nm (12 ft. lbs.)
^
Slave cylinder to case
Torque: 43 Nm (32 ft. lbs.)
^
Slave cylinder bleeder screw
Torque: 8 Nm (69 inch lbs.)
^
Flexible hose to slave cylinder
Torque: 20 Nm (14 ft. lbs.)