Trooper S V6-3.5L (1998)
2. Install speed sensor fixing bolt and tighten the fixing bolt to the specified torque.
Torque
Sensor Side: 8 Nm (69 inch lbs.)
Caliper Side: 155 Nm (115 ft. lbs.)
3. Install speed sensor cable fixing bolt (Lower side) and tighten the fixing bolt to the specified torque.
Torque: 24 Nm (18 ft. lbs.)
4. Install speed sensor cable fixing bolt (Upper side) and tighten the fixing bolt to the specified torque.
Torque: 6 Nm (52 inch lbs.)
NOTE: Confirm that a white line marked on the cable is not twisted when connecting the speed sensor cable.
5. Install speed sensor connector.