isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Sunroof / Moonroof Motor > < Body - Wind Noise/Turbulence
Page 1
background image

Sun Shade: Service and Repair

Disassembled View

REMOVAL

1. Remove the decoration cover.
2. Open the sun roof half position, remove the sunshade stopper screw and pull out the sunshade (6) until its front side protrudes a little from the sun

roof glass (2) to remove the sunshade stopper.

3. Remove the sun roof deflector. Refer to Sun Roof Windguard.
4. Open the sun roof completely.
5. Remove the sunshade guide rail stopper (5), and pull out the sunshade up to the rail edge.

6. Remove the guide pin (4) in the sunshade through the notch (7) of guide rail (1) and then draw the sunshade out of the roof by pushing inward the

retaining clips (3) on both sides.

INSTALLATION

To install, follow the removal steps in the reverse order.

Sunroof / Moonroof Motor > < Body - Wind Noise/Turbulence