Trooper S 2WD V6-3.5L (2001)
Piston Ring: Specifications
Piston Rings
Any worn or damaged part discovered during engine overhaul must be replaced with a new one.
1. Ring end gap measurement
^
Insert the piston ring into the bore.
^
Push the ring by the piston, at a right angle to the wall, into the point at which the cylinder bore diameter is the smallest.
^
Measure the ring end gap.
^
Positioning mark (1) is painted as shown in the illustration.
Marked T: No.1 Compression ring
Marked T2: No.2 Compression ring