Trooper S 2WD V6-3.5L (2001)
Valve Cover: Service and Repair
Cylinder Head Cover LH
Removal
1. Disconnect battery ground cable.
2. Remove engine cover from the dowels on the common chamber.
3. Disconnect positive crankcase ventilation hose.
4. Remove ground cable fixing bolt on cylinder head cover.
5. Ignition coil connector and ignition coil.
^
Disconnect the three connectors from the ignition coils.
^
Remove harness bracket bolt on cylinder head cover.
^
Remove fixing bolts on ignition coils.
6. Disconnect fuel injector harness connector then remove fuel injector harness bracket bolt.