Trooper S 2WD V6-3.5L (2001)
2. Install the ignition coil assemblies and spark plug boot over the spark plug.
CAUTION: Ignition coil assembly #6 is different from ignition coil assembly from #1 to #5. Ignition coil assemblies #6 is short type. So, note it
when installing ignition coil assembly of #6.
3. Install ignition coil assemblies and tighten the fixing bolts to the specified torque.
Torque: 4 N.m (35.4 lb in)
4. Connect the ignition coil connector at the ignition coil assemblies.
5. Connect the negative battery cable.
