Trooper S 2WD V6-3.5L (2001)
Fuel Line Coupler: Service and Repair
Fuel Tube / Quick - Connect Fittings
REMOVAL AND REUSE
REMOVAL
1. Open the fuel cap to relieve the fuel pressure in the tank.
If the fuel quick-connect fittings are dusty, clean with an air blower, etc. and then remove it.
As some pressure may remain in the piping, cover the connector with a cloth, etc. to prevent the splashing of fuel in the first disconnection of the
piping.
2. For removal of the delivery pipe (feeding fuel to the engine), hold the connector in one hand, and hold the retainer tab with the other hand and pull
out the connector, as illustrated. The pipe can be removed with the retainer attached.
3. For removal of the return pipe (returning fuel to the tank), hold the pipe in one hand, and pull out the connector with the other hand while pressing
the square relieve button of the retainer, as illustrated.