Trooper S 2WD V6-3.5L (2001)
Engine Control Module: Description and Operation
PCM Voltage Description
PCM Voltage Description
The PCM supplies a buffered voltage to various switches and sensors. It can do this because resistance in the PCM is so high in value that a test light
may not illuminate when connected to the circuit. An ordinary shop voltmeter may not give an accurate reading because the voltmeter input impedance is
too low. Use a 10-megohms input impedance digital voltmeter (such as J 39200) to assure accurate voltage readings.
The input/output devices in the PCM include analog-to-digital converters, signal buffers, counters, and special drivers. The PCM Controls most
components with electronic switches which complete a ground circuit when turned "ON." These switches are arranged in groups of 4 and 7, called either
a surface-mounted quad driver module (QDM), which can independently Control up to 4 output terminals, or QDMs which can independently Control up
to 7 outputs. Not all outputs are always used.
