Trooper S 2WD V6-3.5L (2001)
Removal
1. Disconnect the battery ground cable.
2. Disconnect the seat belt warning connector (driver's side) (3) and remove a clip (2).
3. Remove the front seat buckle assembly (1).
Installation
To install, follow the removal steps in the reverse order, noting the following points.
1. Fix the buckle to the rotation-stop position(2) securely to install the front seat buckle assembly (1).
2. Tighten the buckle anchor bolt to the specified torque
Torque: 39 Nm (29 lb ft)
Rear Seat Belt
