Trooper S 2WD V6-3.5L (2001)
2. Install the tailgate glass (2).
-
Clean the bonding surfaces of both the tailgate glass and the tailgate panel.
-
Be absolutely sure to apply glass primer to the tailgate glass and PCV primer to the glass moulding (1).
-
Apply a sealing adhesive to the circumference of the tailgate glass as shown.
-
Insert the clip of the tailgate glass A portion into the tailgate panel hole to position the glass.
-
Install the new tailgate glass clip to the clip of the tailgate glass B portion while sliding it, and bond the glass to the tailgate panel by applying
pressure. Always use new tailgate glass clips.
-
Cure the bonding at a temperature of 20-30 °C (68- 86 °F) for 24 hours.
-
Check that the tailgate glass does not leak water.