Trooper S 4WD V6-3.5L (2002)
9. Remove the inside handle.
10. Remove the door wood panel.
Installation
To install, follow the removal steps in the reverse order, noting the following point.
1. When installing the inside handle(2), assemble it temporarily to the inside handle link(1).
2. Pass the inside handle(4) through the mounting hole of the trim panel and assemble the trim panel.
Engage seven clips(8) into the door panel. Also, connect the courtesy light connector(5) and leave the connectors of the speaker(7), tweeter(9) and
power window(3) drawn out to their prescribed positions, so that they will not be caught.
