Trooper S 4WD V6-3.5L (2002)
-
Pry the power window switch out and disconnect the switch connector.
4. Remove the inside handle fixing screw.
-
Remove the screw that fixes the inside handle(5), slide the inside handle to the position illustrated, and leave it there for the moment.
CAUTION: Take care not to impose excessive force on the inside handle link(4), lest this link be elongated, which could make it
impossible to operate the door with the inside handle.
5. Remove the door trim panel(6).
-
Remove two fixing screws(8) to take off seven clips(7) from the door panel.
