Trooper S 4WD V6-3.5L (2002)
Passenger Compartment Cross Beam: Service and Repair
Cross Beam Assembly
Parts Location
Removal
1. Disconnect battery ground cable.
2. Remove instrument panel assembly.
3. Remove side support bracket assembly (LH/RH).
-
Remove the 4 fixing bolts on both sides.
4. Remove cross beam center bracket
-
Remove 2 fixing nuts.
5. Remove instrument panel center bracket.
-
Disconnect the PCM and EBCM connector.
-
Remove the DERM (SRS) with 3 fixing nuts.
CAUTION: For precautions on installation or removal of SRS-air bag system, refer to Supplemental Restraint System (SRS) - AIR
BAG.
-
Remove the 2 fixing nuts (upper) and the 4 fixing bolts (lower).
