Trooper S 4WD V6-3.5L (2002)
5) Disconnect switch connector.
6) Remove parking brake lever.
7) Remove parking brake front cable.
Installation
1) Install parking brake front cable.
2) Install parking brake lever and apply grease (BESCO L- 2 or equivalent) to front cable contact point.
3) Reconnect switch connector.
4) Install bolts and tighten the parking brake lever fixing bolt to the specified torque.
Torque: 15 Nm (11 ft. lbs.)
5) Install center console.
6) Install equalizer.
7) Install adjusting nut and adjust the parking brake lever.
