Trooper S 4WD V6-3.5L (2002)
Seat Belt Reminder Lamp: Description and Operation
Circuit Operation
Key-In Ignition Warning
When the key remind switch is closed, battery voltage is applied to the PNK/BLU wire of the alarm and relay control unit. With the left front door open,
ground is provided at the GRY/RED wire of the alarm and relay control unit and the beeper sounds.
Seat Belt Warning
With the starter switch in ON or START battery voltage is applied to the seat belt warning light from fuse C-10. With the driver's seat belt unbuckled,
ground is provided at the BLU wire of the alarm and relay control unit. With the starter switch in the ON position, the seat belt warning light turns on
and the beeper will sound for four to eight seconds. With the driver's seat belt buckled, the seat belt warning light turns on for four to eight seconds, but
the beeper does not sound.
Lights-on Warning
When the starter switch is turned from the ON or START position to the OFF position, and the park lights are on, the taillight relay applies battery
voltage to the alarm and relay control unit at the GRN/RED wire. The beeper will sound continuously until the lights are turned off.
