Trooper S 4WD V6-3.5L (2002)
NOTE: Pass the lead wire through the tabs on the plastic cover (wire protector) of air bag to prevent lead wire from being pinched.
2. Install air bag into steering wheel and tighten bolts to specified sequence as shown in figure.
Torque: 8 N.m (69 lb in)
CAUTION: Never use the air bag assembly from another vehicle and difference model year air bag assembly.
The air bag assembly has identification colors on the bar code label from '00 model as follows.
-
Yellow color for driver air bag assembly.
-
White color for passenger air bag assembly.
Use only new air bag assembly proper to the Trooper which is being repaired.
3. Enable the SRS (Refer to "Enabling the SRS" in this section).
