Trooper S 4WD V6-3.5L (2002)
3. Install cushion rubber.
4. Install snap ring.
5. Install Combination switch and SRS coil assembly. After installation of combination switch assembly, connect the combination switch wiring
harness connector and the SRS 2-way connector located under the steering column.
6. Turn the SRS coil counterclockwise to full, return about 3 turns and align the neutral mark.
Caution: When turning the SRS coil counterclockwise to full, stop turning it resistance is felt forced further turning may damage to the cable in
the SRS coil.
