VehiCROSS 4WD V6-3.5L (1999)
12. Remove the luggage side trim cover.
-
Remove the five fixing screws.
-
Pry the trim cover clips (1) free from the body panel.
-
Remove the two clips (RH side).
Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. Tighten the front seat belt upper anchor bolt to the specified torque.
Torque: 49 Nm (36 lb.ft)
2. Tighten the front seat belt lower anchor bolt and rear seat belt anchor bolts to the specified torque.
Torque: 39 Nm (29 lb.ft)