isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Spoilers, Flaps, and Air Dams > < Heated Mirror Switch|Service and Repair
Page 1
background image

Power Mirror Switch: Service and Repair

Removal

1. Disconnect the battery ground cable.
2. Remove rear console assembly (1).

Remove the 4 screws.

3. Remove door mirror control switch (2).

Push the lock from the back side of the rear console.

4. Remove door mirror defogger switch (3).

Push the lock from the back side of the rear console.

Installation 

To install, follow the removal steps in the reverse order, noting following point:
1. Depress the each switch with your fingers until it lock securely.

Spoilers, Flaps, and Air Dams > < Heated Mirror Switch|Service and Repair