VehiCROSS 4WD V6-3.5L (1999)
Cruise Control Actuator Cable: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Remove the cruise actuator assembly (4).
-
Disconnect the connector (3).
-
Remove the cable end (1) from the throttle link (cruise control side).
-
Loosen two fixing nuts (2).
-
Remove three actuator assembly fixing screws.
Installation
To install, follow the removal steps in the reverse order, noting the following point:
1. Take care not to bend the cable excessively. See: Diagrams
2. After installing the cruise actuator, follow steps for cruise control cable adjustment. See: Adjustments
