VehiCROSS 4WD V6-3.5L (1999)
^
Apply sealant (TB1207B or equivalent) to the oil pump mounting surface.
^
The oil pump assembly must be installed within 5 minutes after sealant application before the sealant hardens.
^
Apply engine oil to oil seal lip.
^
Install oil pump in the cylinder block and tighten fixing bolts to the specified torque.
Torque: 25 Nm (18 ft. lbs.)
3. Install oil strainer with O-ring, tighten to the specified torque.
Torque: 25 Nm (18 ft. lbs.)
4. Install oil pipe with O-ring, tighten fixing bolts to the specified torque.
Torque: 25 Nm (18 ft. lbs.)
5. Install crankcase.
^
Remove oil on crankcase mounting surface and dry the surface.
