VehiCROSS 4WD V6-3.5L (1999)
Exhaust Pipe: Service and Repair
Removal
1. Disconnect battery ground cable.
2. Raise the vehicle and support with suitable safety stands.
3. Remove rear exhaust pipe fixing nuts (3), then disconnect rear exhaust pipe from exhaust silencer.
4. Remove mounting rubber (1).
5. Remove rear exhaust pipe (2).
Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. Install the mounting rubber (1).
2. Install the exhaust pipe (2) and tighten two nuts (3) on exhaust silencer to specified torque.
Nuts: 43 Nm (32 ft. lbs.)