VehiCROSS 4WD V6-3.5L (1999)
Fan Switch: Symptom Related Diagnostic Procedures
Symptom Table
Fan Control Lever (Fan Switch) Diagnosis
Current flows to the blower motor through the heater relay (X-6) to activate the rotation of the blower motor by turning "ON" the fan control knob (tan
switch). Blower motor speed is controlled in stages by the resistor, by operating the switch from "LOW" to "HIGH".
For the inspection of the relays, switches and units in each table, refer to the "Individual Component Inspection". See: Testing and
Inspection/Component Tests and General Diagnostics/Individual Component Inspections
Wiring Diagram
Conditions/Corrections
