VehiCROSS 4WD V6-3.5L (1999)
Malfunction Indicator Lamp: Testing and Inspection
This test is conducted check MIL and Low Fuel Lamp for its working.
Tech2 must be used for this test.
Test Procedure:
1. Connect Tech 2 to the vehicle DLC.
2. Run the Engine at idle.
3. Select F3: Miscellaneous Test in the Application Menu.
4. Select F0: Lamps Test in the Miscellaneous Test.
5. Select F0: Malfunction Indicator Lamp.
6. Push "On" soft key.
7. Make sure Lamp illuminates.
