VehiCROSS 4WD V6-3.5L (1999)
Torque: 19 Nm (14 lb.ft)
3. Tighten the steering column fixing bolts (Cross beam) to the specified torque.
Torque: 17 Nm (13 lb.ft)
4. Tighten the universal joint to the specified torque.
Torque: 25 Nm (18 lb.ft)
5. Install steering lock cylinder assembly (11).
6. Connect shift lock cable.
7. Install cushion rubber.
8. Install snap ring.
9. Install the combination switch assembly with Supplemental Restraint System (SRS) coil (9).
10. Connect the wiring harness connector (10) located on the base of steering column.
11. Turn the SRS coil clockwise to full, return about 3 turns and align the neutral mark.
CAUTION: When turning the SRS coil clockwise to full, stop turning if resistance is felt. Further forced turning may damage the cable in the
SRS coil.
