VehiCROSS 4WD V6-3.5L (1999)
Fuel Gauge Unit: Service and Repair
Engine Fuel
Fuel Gauge Unit And Associated Parts
Fuel Gauge Unit And Associated Parts
REMOVAL
CAUTION: When repair to the fuel system has been completed, start engine and check the fuel system for loose connection or leakage. For the fuel
system diagnosis, see "Computers and Control Systems / System Diagnosis".
1. Disconnect battery ground cable.
2. Loosen fuel filler cap.
3. Drain fuel.
Tighten drain plug to the specified torque after draining fuel.
Torque: 20 Nm (14 lb.ft) - M8
4. Wiring connector
-
Disconnect wiring connector (1) from the unit.
5. Fuel gauge unit
-
Remove the fixing screws, then the fuel gauge unit (2).
NOTE: After removing fuel gauge unit, cover fuel tank to prevent any dust entering
INSTALLATION
