VehiCROSS 4WD V6-3.5L (1999)
NOTICE: Pass the lead wire through the tabs on the plastic cover (wire protector) of inflator to prevent lead wire from being pinched.
6. Tighten bolts to specified torque.
Torque: 8.8 Nm (78 inch lbs.)
7. Install instrument panel lower cover then install the engine hood opening lever.
8. Connect the yellow 3-way SRS connector located under the steering column.
9. Connect the battery "-" terminal cable.
10. Turn the ignition switch to "ON" while watching warning light and check the light should flash 7 times and then go off. If lamp does not operate
correctly, refer to Air Bags (Supplemental Restraint Systems).