VehiCROSS 4WD V6-3.5L (1999)
2. Remove bolt (2 pcs) (2).
3. Remove magnetic switch (5).
4. Remove dust cover (4).
5. Remove torsion spring bolts, then the magnetic switch assembly.
6. Remove torsion spring(3) from magnetic switch assembly (5).
7. Remove screw (2 pcs) (8).
8. Remove through bolt (2 pcs) (7).
9. Remove screws and through bolts, then the rear cover (9) then remove thrust washer (10).
10. Remove brush holder (6).
11. Raise a brush spring to detach brushes (4 pcs) from the commutator face and pull off the brush holder (12) and brush (11).
12. Remove yoke assembly (14).
13. Remove armature (15).