VehiCROSS 4WD V6-3.5L (1999)
3. Install the insulator on the coil spring. Jack up the axle case gently with the top of the coil spring set to the spring seat on the frame side.
4. Install shock absorber and tighten the nut lightly, then retighten it to the specified torque after the vehicle is at curb height.
NOTICE: When mounting shock absorber, be sure not to use grease on bushings or any other nearby part.
Torque: 78 Nm (58 ft. lbs.)
5. Install stabilizer bar.
Torque: 50 Nm (37 ft. lbs.)
6. Install parking brake cable bracket.