VehiCROSS 4WD V6-3.5L (1999)
14. Lower the vehicle and disconnect the Right-Hand front drive shaft assembly, then remove the front axle case assembly and front drive shaft
assembly (Left-Hand)
15. Remove front drive shaft assembly (Right-Hand).
Installation
1. Install front drive shaft assembly (Right-Hand) and lay the assembly on the lower arm.
2. Install front axle case assembly and front drive shaft assembly (Left-Hand) and place the axle case on the jack, connect to the front drive shaft
assembly (Right-Hand) before installing to the vehicle.
3. Install bolt and tighten the mounting bracket fixing bolt to the specified torque.
Torque: 116 Nm (85 ft. lbs.)
4. Install washer and spacer.
5. Tighten the mounting bolt and nut to the specified torque.
Torque: 152 Nm (112 ft. lbs.)
6. Connect breather hose and install the hose clip.
7. Install propeller shaft.
8. Install suspension crossmember.
9. Steering link and arm assembly.
10. Install hub assembly (Disc, back plate and knuckle).
