Majestic L6-4.0L (1990)
FIG. 4
^
Check and set the height of the terminal lance, fig. 4.
^
Reinstall the terminal to the terminal block cavity and ensure that it is fully latched.
^
Repeat the last 3 steps on the remaining heavy-duty spade terminals.
^
Replace the terminal retaining plug in the correct orientation, ensuring it is fully installed and latched in the housing.
^
Reinstall the relay to the housing.
^
Ensure that the terminal retaining plug is still fully engaged.
^
Remount the relay and the housing to the mounting bracket.
^
Reconnect the battery.
Warranty Information:
Fault Code:
7UJN
Repair Operation:
86.55.65 Renew pump relay W/JDS test
Time Allowance:
0.40 hrs.
Repair Operation:
86.55.65/09 Renew pump relay w/out JDS test
Time Allowance:
0.10 hrs.
If additional time is required due to a loose or disconnected terminal, the following applies:
Repair Operation:
Follow standard procedure for "Shop Time" application using 86.55 as the first four positions.
Time Allowance:
"Shop Time" to perform terminal repair.