Majestic L6-4.0L (1990)
Passive Restraint Motor/Drive: Service and Repair
REMOVAL
Remove the front seat.
Remove the seat runner to floor securing bolts.
Lift up the inertia reel side of the runner for access. Use a suitable block for support.
Fig. 1
Remove the inertia reel securing bolt (Fig 1), remove the reel assembly.
Remove the B post upper and lower trim pads. Remove the cantrail crash roll.
Remove the guide rail securing screws and dock assembly securing bolts. Displace the B post upper trim pad mounting bracket.
Displace and remove the guide rail from the dock assembly.
Move the dock assembly adjustment knob to its lowest position.
Fit suitable tape to the dock assembly plastic face and B post aperture lower edge for protection (Fig 4).
Fig. 2
Remove the anti-rattle foam blocks from the B post (Fig 2).
Fig. 3
Disconnect the motor/harness multi plugs (Fig 3).
