Majestic L6-4.0L (1990)
Windshield Washer Reservoir: Technical Service Bulletins
Washer Fluid Reservoir - Revised to 7 Liter
SECTION:
84
No:
8
WASHER FLUID RESERVOIR
Model:
SEDAN RANGE Date: APRIL, 1991
KEY POINTS:
INTRODUCTION OF NEW 7 LITER RESERVOIR
ISSUE:
A 7 liter washer fluid reservoir is used on XJ6 and Sovereign vehicles beginning with VIN 610400.
The 7 liter reservoir should be used for ALL reservoir replacements.
ACTION:
Use the following procedure for 7 liter reservoir installation:
^
Make sure the neck of the lower reservoir has a smooth inside surface and has no molding faults.
^
Always install a new sealing ring (JLM 1243) when replacing the upper and/or lower reservoirs.
^
Lubricate the sealing ring with liquid soap.
NOTE:
Avoid twisting the sealing ring when installing the upper and lower reservoirs.
^
Make sure that the rod support threads are clean. Install and tighten mounting bolts to 1-3 N-m (1-2.5 ft.lbs.).
NOTE:
DO NOT overtighten mounting bolts.
PARTS INFORMATION:
When installing a new 7 liter reservoir (lower) on a pre-VIN 610400 XJ6 or Sovereign, the following parts are required:
Rod Support
DBC 2731
Rod Support
DBC 2732
Reservoir
JLM 2261
Sealing Ring
JLM 1243
WARRANTY INFORMATION:
Fault Code:
7LE
Repair Operation Number:
84.10.01 (Washer Reservoir-Renew)
Time Allowance:
0.65 hrs.
