S-Type (X200) V6-3.0L (2000)
61.
Install lead plug plastic body.
62.
Tighten lead plug plastic end cap.
Note:
Ensure good contact between ground clasp and ground braiding.
63.
Disconnect Jaguar antenna lead plug from Jaguar radio link lead socket (Illustration 22).
64.
Displace the plastic fir tree clip for the Jaguar link lead socket from the multiplug plastic support (Illustration 23).
65.
Reposition Jaguar link lead for access. Remove knee bolster cover to improve access, if necessary.
66.
Unwrap and remove tape securing plastic fir tree clip to Jaguar link lead socket.
67.
Remove plastic fir tree clip and retain for further use.