S-Type (X200) V6-3.0L (2000)
/v6-3.0l/Page-1360003.png)
12. CAUTION: Make sure the floor console rear air register distribution duct retaining tangs are not damaged when the floor console rear
air register trim panel is removed. Failure to follow this instruction may result in damage to the vehicle.
Remove the floor console rear air register trim panel.
1. Release the floor console rear retaining tang.
2. Reposition the floor console side trim panels.
3. Remove the floor console rear air register trim panel.
13. Remove the floor console.
Installation
1. NOTE: Make sure the floor console rear air register trim panel retaining clips are installed into the floor console.
To install, reverse the removal procedure.
