S-Type (X200) V6-3.0L (2000)
3. Locally detach the door aperture weatherstrip.
4. Remove the C-pillar trim panel.
Installation
1. CAUTION: Make sure all retaining bolts and retaining nuts are hand started and hand tightened prior to final tightening. Failure to
follow this instruction may result in component damage.
To install reverse the removal procedure.
-
Tighten to 40 Nm.
B-Pillar Trim Panel
B-Pillar Trim Panel (76.13.28)
Removal
1. Locally detach the door aperture weatherstrip.
2. Remove the seat belt anchoring bolt trim cover.